Wexford

Boiler Installation in Wexford

Looking for a plumber to install a new boiler in Wexford? The directory below lists local plumbers and RGI registered gas installers in Co. Wexford who carry out boiler installation and replacement. Gas boiler work in Ireland legally requires an RGI registered installer under the Gas (Interim) (Regulation) Act 2002. Browse the listings and contact them directly to get quotes.

What boiler installation in Wexford involves

Boiler installation in Wexford covers the full process of removing an existing boiler and fitting a new gas, oil or heat pump unit. A qualified RGI registered gas installer must carry out all notifiable gas work under the Gas (Interim) (Regulation) Act 2002, which includes the connection and commissioning of any new gas boiler. This means checking for gas, registering the installation with Gas Networks Ireland and issuing a completion certificate. Most residential boiler installations in Co. Wexford take between four and eight hours depending on whether pipework needs to be relocated or upgraded.

New boilers in Ireland are typically condensing combination boilers for properties with mains gas, or oil-fired condensing boilers for areas outside the gas network. Heat pump installations are becoming more common in Wexford following SEAI grant support of up to €10,500 for air-to-water systems. Any boiler replacement in a home built before 2006 should include a system flush to remove sludge and debris before the new unit is connected, protecting the warranty and improving efficiency from day one.

How much does boiler installation cost in Wexford?

Job type Typical cost in Wexford
Combi boiler replacement (supply and fit) €1,800 to €2,800
Oil boiler replacement (supply and fit) €2,000 to €3,500
Air-to-water heat pump installation €8,000 to €15,000
Annual boiler service €80 to €140
Power flush before new boiler €250 to €450
System upgrade (pipework, radiators) €500 to €2,000 extra

Boiler installation costs in Wexford depend on the fuel type, boiler brand and whether additional work is required such as a power flush, system upgrade or flue relocation. Labour costs in Dublin and the greater Leinster area run €50 to €100 per day higher than rural counties. Supply-and-fit packages from local Wexford engineers typically include the boiler, all fittings and RGI certification in a single quote.

SEAI grants significantly reduce the net cost of heat pump installations. As of 2026, the Better Energy Homes grant for an air-to-water heat pump is €10,500, and homes that also upgrade insulation may qualify for the One Stop Shop grant of up to €25,000. Ask any Wexford gas installer you contact whether your home meets the qualifying criteria before committing to a heat pump over a like-for-like boiler replacement.

How boiler installation works in Wexford: step by step

Survey and quote

A qualified gas installer visits your Wexford property to assess the existing system, flue route, gas meter capacity and boiler location. They check the condition of the pipework and radiators and advise on whether a power flush is needed before the new boiler is connected. A written quote is provided covering supply, installation, all fittings and RGI certification.

System preparation and flush

Before the new boiler is installed, the existing system is flushed to remove sludge and magnetite that has built up over the years. Most boiler manufacturers in Ireland require evidence of a clean system for the warranty to be valid. A magnetic filter is typically fitted to the return pipe at this stage to protect the new boiler from future contamination.

Boiler removal and installation

The existing boiler is drained, disconnected from the gas supply and removed. The new boiler is positioned, all pipe connections are made, the flue is fitted and the gas connection is made by the RGI registered installer. This stage takes between three and six hours depending on access and the complexity of the pipework layout in your Wexford property.

Commissioning and RGI certification

The completed installation is pressure tested, purged of air and fired for the first time. The engineer checks gas pressure, combustion readings and heat distribution to all radiators before signing off. A completion certificate is issued and the installation is notified to Gas Networks Ireland. You receive written documentation of the RGI certification, which is required for insurance and warranty purposes.

RGI registration and legal requirements for boiler installation in Wexford

All gas boiler installations in Wexford must be carried out by an RGI registered gas installer. The RGI scheme is administered by Gas Networks Ireland and is the only legally recognised certification for notifiable gas work in Ireland. Homeowners who allow unregistered persons to carry out gas work void their home insurance and may face prosecution under the Gas (Interim) (Regulation) Act 2002. You can verify any installer's RGI number at rgi.ie before booking.

Oil boiler installation in rural parts of Co. Wexford is governed by the Building Control (Amendment) Regulations. Works on the heating system that alter the heat source may require a Commencement Notice depending on scope. Your installer will advise whether the project falls within exempted development. For heat pump installations, SEAI One Stop Shop providers handle all paperwork and grant applications as part of the service.

How to choose a boiler installation plumber in Wexford

Verify RGI registration before booking

Any engineer carrying out gas boiler installation in Wexford must be RGI registered. Ask for their RGI number before booking and verify it at rgi.ie. An unregistered person carrying out gas work is breaking the law regardless of experience or qualifications claimed. Your insurer will not cover incidents caused by unregistered gas work.

Get at least two itemised quotes

Boiler installation costs in Wexford vary between engineers. Ask for itemised quotes that separate the cost of the boiler unit, labour, power flush and any system modifications. This makes comparison straightforward. Be wary of quotes that are significantly below market rate — these often exclude the boiler brand quality, RGI certification or post-installation commissioning.

Ask what warranty covers the installation

Most boiler manufacturers offer five to ten year parts warranties conditional on annual servicing. Ask your Wexford engineer what warranty comes with the unit and whether the installation labour is also warranted. Some engineers offer a two-year labour warranty on top of the manufacturer's parts warranty, which protects you from call-out charges on any installation-related faults in the early years.

Check reviews and completed RGI notifications

Ask any Wexford boiler installer for references from recent installations in the county. Google reviews from local customers are the most reliable indicator of quality. An engineer who consistently delivers on time, provides RGI documentation promptly and responds to post-installation queries will have reviews that reflect this. Avoid engineers with no reviewable history or those who cannot provide documentation of previous RGI-certified installations.

Boiler installation in Wexford: frequently asked questions

Do I need planning permission for a new boiler in Wexford?

In most cases, no. A like-for-like boiler replacement is generally exempted development in Wexford and does not require planning permission. External works such as fitting a new oil tank in a visible location may have minor restrictions. Your installer will advise if any notification is required for your specific property.

How long does boiler installation take in Wexford?

A standard combi boiler replacement in a Wexford home takes between four and eight hours. More complex jobs such as converting from oil to gas or installing a heat pump with underfloor heating can take one to three days. Most RGI registered gas engineers in Wexford complete a standard swap in a single working day.

What RGI certification should I receive after boiler installation in Wexford?

After any gas boiler installation in Wexford, your RGI installer must provide a completion certificate. This proves the installation was carried out by a registered professional and is essential for home insurance, future property sales and warranty claims. If you are not offered a certificate, ask for one before paying.

Is a heat pump better than a gas boiler in Wexford?

Heat pumps are most cost-effective in well-insulated homes with underfloor heating or large radiators. If your Wexford home has a BER rating of C or better and you qualify for the SEAI grant, a heat pump can pay back within 7 to 12 years. For older, poorly insulated properties, a high-efficiency condensing gas boiler is often the more practical short-term option.

What boiler brands do engineers in Wexford typically install?

The most commonly fitted boiler brands in Ireland are Worcester Bosch, Viessmann, Vaillant, Baxi and Ideal. Local Wexford engineers often have preferred suppliers and may offer better warranty terms on brands they stock regularly. Always ask what warranty covers both the unit and the installation labour before committing.

Can I get a grant towards boiler installation in Wexford?

SEAI grants are available for heat pump installations, not for like-for-like gas or oil boiler replacements. If you are switching from oil to a heat pump in Co. Wexford, the Better Energy Homes scheme covers up to €10,500 and the One Stop Shop scheme covers up to €25,000 for a full energy upgrade bundle. Ask your Wexford installer about eligibility before deciding on a system.

Find a plumber in Wexford

Browse the full directory of local plumbers in Co. Wexford and contact them directly.

0 contractor selected